If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Toshiba e-Studio 5520C Service recommended for SPC
Re: Toshiba e-Studio 5520C Service recommended for SPC
Originally posted by Alex1
Toshiba e-Studio 5520C Service recommended for SPC
any help will be appreciated.
Check page 1408 of the 6530sm pdf. This is the code i have seen get missed before and it will never go away and finish the 05-396 without error 08-2561 needs to be set back to 1 if its at 0 which it goes to automatically on error it will never complete the 396 without error. Its my opinion that this should be at the top of the troubleshooting for this message instead of near the end where you have tried each thing in series and never got it to work since you didnt change the code but i guess just an example of why we should read it all before you start. The other two things i have seen fix this is epu board and new developer material on different occasions.
Comment