E studio 167 Scanning Problem after installing network Printing Module.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • imalkait

    #1

    [Misc] E studio 167 Scanning Problem after installing network Printing Module.

    Hi Friends,

    I have E studio 167 , Recently i Installed GA1190 Network Printing Module to enable Both Side Printing.
    After Installation of said Unit. Scan gear application (which i used to have scanning) is not working. Do i have to install another hardware for it..??

    Please help me to sort this matter,

    Cheers,
    Imalka
  • ivovb
    Senior Tech

    500+ Posts
    • Apr 2008
    • 695

    #2
    Re: E studio 167 Scanning Problem after installing network Printing Module.

    Yes, You need GA-1200 in order set-up network scanning. Toshiba viewer can't be used with GA-1190.

    BR
    I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

    Comment

    • imalkait

      #3
      Re: E studio 167 Scanning Problem after installing network Printing Module.

      Originally posted by ivovb
      Yes, You need GA-1200 in order set-up network scanning. Toshiba viewer can't be used with GA-1190.

      BR

      Thank you So much for the information.

      Comment

      Working...