what's the specific solution for "MACHINE INFORMATION ERROR" in es452.why and when it occurs????? Sometime it is solved by changing hdd,firmware update or sys board.Some days ago by firmware updating I perform 0+8>665,690,947. copier is able to copy but I can't enter 0+8 mode it show machine information error, Any suggesstion please
toshiba e studio 452 say machine information error
Collapse
X
-
Tags: None
-
Re: toshiba e studio 452 say machine information error
Can you print off 9S-106? What errors are recorded? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: toshiba e studio 452 say machine information error
Hi Riyard
You try changing the Ramtron IC. After It's has been changed the machine maybe inform C59. Don't worry, you update firmware. It will be ok. another hand when you update firmware. Ex the version of machine is not syncronize with your firmware version, you up one of them It will display the machine...... In this case, you up OS first after that you do update full. Good luck to you.Comment
-
Riyadh hossain
Re: toshiba e studio 452 say machine information error
"Machine information error " problem solved by changing an IC located in sys board . sometimes this problem is solved by Hdd or sys board or firmware update. specially it occur after firmware update and 08> 665. Do you know someone why it occur??? and what is perfect one solution of itAttached FilesComment
Comment