Need help with the Kyocera CS-650C it is a Toshiba based copier.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sOUner
    Junior Member
    • Oct 2010
    • 4

    #1

    [Electrical] Need help with the Kyocera CS-650C it is a Toshiba based copier.

    Not sure what it crosses over to in Toshiba.

    Drum/Developer assembly was stuck and wouldn't come out. I removed Drum Drive Shafts and Motors assembly as one unit. Just removed 4 screws and pulled unit out, didn't disassemble. Now I am getting "Close Duplexing Unit Cover". Close door and fans come on. Open duplexing cover and it says to close. Reseated connections on both ends. Kyocera referred me to this site!
Working...