Toshiba 6520 Copier

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RonMac
    Technician

    50+ Posts
    • Oct 2008
    • 57
    #1

    [Error Code] Toshiba 6520 Copier

    I am getting an error code 449. Replaced the thermistors, reset 08400 many times, but still get error code. Any help appreciated. TY

    Ron
    Tags: None
    • bigwul
      Technician

      50+ Posts
      • Jun 2014
      • 60
      #2
      Re: Toshiba 6520 Copier

      Search C449 on this forum - you will find additional suggestions. One of them being to check the connectors etc. for bent / broken pins.

      Read the other posts....have you tried all they suggest?

        Comment

        • Luther
          Senior Tech

          500+ Posts
          • May 2006
          • 682
          #3
          Re: Toshiba 6520 Copier

          clean the IH coil contacts that contact the fuser

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              Re: Toshiba 6520 Copier

              Power can do this. Get out your power quality analyzer. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • RonMac
                  Technician

                  50+ Posts
                  • Oct 2008
                  • 57
                  #5
                  Re: Toshiba 6520 Copier

                  Originally posted by bigwul
                  Search C449 on this forum - you will find additional suggestions. One of them being to check the connectors etc. for bent / broken pins.

                  Read the other posts....have you tried all they suggest?
                  Put new thermistors in; thermal fuses are good. TY for your suggestions. Ron

                    Comment

                    • RonMac
                      Technician

                      50+ Posts
                      • Oct 2008
                      • 57
                      #6
                      Re: Toshiba 6520 Copier

                      Originally posted by Luther
                      clean the IH coil contacts that contact the fuser
                      Will try that. TY. Ron

                        Comment

                        • RonMac
                          Technician

                          50+ Posts
                          • Oct 2008
                          • 57
                          #7
                          Re: Toshiba 6520 Copier

                          Originally posted by blackcat4866
                          Power can do this. Get out your power quality analyzer. =^..^=
                          Ok thanks. Ron

                            Comment

                            • sagar4
                              Trusted Tech
                              • Dec 2012
                              • 127
                              #8
                              Re: Toshiba 6520 Copier

                              Originally posted by RonMac
                              Ok thanks. Ron
                              Also I found two of my customers plug there copier into a 15 amp outlet with an adapter.
                              "Broken again"

                                Comment

                                • RonMac
                                  Technician

                                  50+ Posts
                                  • Oct 2008
                                  • 57
                                  #9
                                  Re: Toshiba 6520 Copier

                                  Originally posted by sagar4
                                  Also I found two of my customers plug there copier into a 15 amp outlet with an adapter.
                                  Heat roller was bad; replaced full fuser unit. TY Ron

                                    Comment

                                    Previous template Next
                                    Working...