If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Re: toshiba e-studio 450 -need opinions and review
1.5M prints is a lot, too many. I hope it's a gift/donation because it isn't worth much.
I've seen huge negative counts on another Toshiba eS2500. The EEPROM on the Logic board was corrupt.
In either case I wouldn't spend much time on machines this old. Only if you had an unlimited supply of graveyard parts. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Re: toshiba e-studio 450 -need opinions and review
Originally posted by savi0r
Hi guys. I need to hear some reviews about the toshiba estudio 450. Is it a good,reliable machine? Pros,cons...? And i need to hear what you think about this 'print total counter list'. The guy who owns the copier says the machine's total counter is about 25 k. Any thoughts?
The 450 is a "workhorse" compared to the machine that replaced it; the 455. If it truly has just 25K on it then it is worth buying. The fusing system is very robust in this model.
Comment