Toshiba e studio 452 Upper picker finger holder

[Alex1]

Re: Toshiba e studio 452 Upper picker finger holder

I understand. The part you want is the one that degrades due to heat most commonly. The holders break so you end up with only one or two heat roller claws remaining. =^..^=

Thats the one. Let see if that's the one that precision has

[blackcat4866]

Re: Toshiba e studio 452 Upper picker finger holder

The hard bit is not being able to see the photo. The exact part I'm chasing is the plastic that holds the fingers that sit on the upper Fuser roller. Not the one that can lift open with the claws.

I understand. The part you want is the one that degrades due to heat most commonly. The holders break so you end up with only one or two heat roller claws remaining. =^..^=

[Alex1]

Re: Toshiba e studio 452 Upper picker finger holder

If it's never been changed, there is a parts revision. Instead of a narrow feature to support the claws, it now extends the whole width of the guide.

There is no photo, but I think this is it:
Toshiba E STUDIO 452 Fuser Exit Guide, Genuine (H6035)

=^..^=

The hard bit is not being able to see the photo. The exact part I'm chasing is the plastic that holds the fingers that sit on the upper Fuser roller. Not the one that can lift open with the claws.

[blackcat4866]

Re: Toshiba e studio 452 Upper picker finger holder

If it's never been changed, there is a parts revision. Instead of a narrow feature to support the claws, it now extends the whole width of the guide.

There is no photo, but I think this is it:
Toshiba E STUDIO 452 Fuser Exit Guide, Genuine (H6035)

=^..^=

[Alex1]

Hi,

im chasing a Toshiba e studio 452 Fuser upper picker fingers holder. They commonly break