Okay so I have a problematic Toshiba TEC Sx5
firstly it was printing black lines, I changed the print head but the same problem persists.
Now when trying to print there are barely noticeable yellow/orange lines which appear to be burn lines.
I then changed the logic board as I had one handy yet this didn't cure the problem either.
I'm thinking maybe a faulty power supply unit or damaged cable harnes that plugs into the back of the print head.
Has anyone else had this issue before ?
firstly it was printing black lines, I changed the print head but the same problem persists.
Now when trying to print there are barely noticeable yellow/orange lines which appear to be burn lines.
I then changed the logic board as I had one handy yet this didn't cure the problem either.
I'm thinking maybe a faulty power supply unit or damaged cable harnes that plugs into the back of the print head.
Has anyone else had this issue before ?