Hey all,
I keep getting intermittent service calls regarding the printer locking everything up...i disconnect the network cable power it back up and it works fine until i plug the network cable back in. I managed to delete the print job with the cable unplugged only, it will not clear if network cable is plugged into machine. Im not to familiar with the network side but i did have customers IT dept check the print query on their end and it was cleared. Any advise will be appreesh, thanks in advance!
I keep getting intermittent service calls regarding the printer locking everything up...i disconnect the network cable power it back up and it works fine until i plug the network cable back in. I managed to delete the print job with the cable unplugged only, it will not clear if network cable is plugged into machine. Im not to familiar with the network side but i did have customers IT dept check the print query on their end and it was cleared. Any advise will be appreesh, thanks in advance!