xerox pro 35 altboot problem

[Tinochka]

I don't have a pissibility to reinstall software on network kontroller via altboot.

I see on the screen:

Xerox LynxOS Preboot 3.0.1 build 110298-G created Mon Jul 15 22:44:26 EDT 2002
Copyright (C) 1987-1997 Lynx Real-Time Systems, Inc.
IDE drive found!
Usage:
To Default Boot from SCSI/IDE Drive 0, Partition B (will default boot in 10 sec)
Enter
To ALT Boot from SCSI/IDE Drive 0, Partition A (for sec image loading)
A

Command? <b h0b /lynx.os>A
ALT-Booting from SCSI/IDE Drive 0, Partition A!
Loading... /lynx.os not found
Error loading from /lynx.os, device h0a
Command?

Сan anyone help?

[Tinochka]

Re: xerox pro 35 altboot problem

on the machine's screen I see this IMG_20150815_184516.jpg

[adriansto]

Re: xerox pro 35 altboot problem

You must use Altboot for software reloading.

[Tinochka]

Re: xerox pro 35 altboot problem

Thanks, I know this.
But I do not see the text which says "Press any key ...." and then I could reinstall software. When the controller begins boot up, I see in the altboot window only the text that is specified in the first message.
This is the Problem.

[adriansto]

Re: xerox pro 35 altboot problem

Remove hdd, check memories and try again


Sent from my V3-E

[Tinochka]

Re: xerox pro 35 altboot problem

I tried removing the hdd and checked the memory. The memory is working properly.
The controller is loaded and writes "system is operational", but I don't have the ability to reinstall the software.
Not appears the following text:



================================
ALTERNATE BOOT Ver 4.0
================================
System ID => Xerox Denali v1.00
Bios ID => American Megatrends Inc. 0704 05/20/2005
Board ID => Celestica Denali P2 CMYI32533011031
uP ID => AMD mobile AMD Duron(tm) 01000 MHz
Main Revision => 4.1.2
================================


Press Any Key For AltBoot Menu (05) 04) 03) 02) :

[adriansto]

Re: xerox pro 35 altboot problem

Check bios battery, remove battery for 20 -30 min then try altboot without hdd.
Bad hdd block the system to boot.
Are you sure the version of altboot you use is the proper version for wc35 ?

[Tinochka]

Re: xerox pro 35 altboot problem

bios battery - 2.92V
I remove'd battery for 20 -30 min then turn on controller without hdd, but altboot show nothing.
altboot version 5.2 for CC35-WCP55F