[CQ] Red color dominating

[Mukasa]

Hi Guys,
I have a Xerox DC 260 which prints alot of magenta per copy after like 2000 copies.
I need to service the machine more often and do calibration then the prints normalizes for a short time then mangeta dominates again.
What can i do to recftify this too much magenta?
Mukasa

[Jake2o]

Re: Red color dominating

Hi Guys,
I have a Xerox DC 260 which prints alot of magenta per copy after like 2000 copies.
I need to service the machine more often and do calibration then the prints normalizes for a short time then mangeta dominates again.
What can i do to recftify this too much magenta?
Mukasa

Have you a picture of the fault?
Have you tried the ADC & ATC sensor assembly. Sometimes it's auto calibration sensors get a small amount of toner trapped in the ADC sensor assembly and this causes the machine to think that it's white point starts out as a magenta colour so it puts a slight magenta wash on the paper.