Hello friends.
I would like to know if anyone has had this problem, the technical manual does not tell me much of the error.
004-350 Marking Device Fail (Controller Video)
Failure occurred in controller video.
Procedure
NOTE: An auto-reset should be underway.
If the problem continues, turn the printer power Off, then On.
If the problem continues, perform Service Diagnostics.
I would like to know if anyone has had this problem, the technical manual does not tell me much of the error.
004-350 Marking Device Fail (Controller Video)
Failure occurred in controller video.
Procedure
NOTE: An auto-reset should be underway.
If the problem continues, turn the printer power Off, then On.
If the problem continues, perform Service Diagnostics.