WC 7545 Unable to Connect to Remote Server

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rosenthal
    Junior Member
    • Apr 2017
    • 8
    #1

    [Error Code] WC 7545 Unable to Connect to Remote Server

    WC7545 says unable to connect to remote server when attempting a scan. Even when scanning to USB.
    Tags: error, scan, scanning, server, xerox
    • prismtech
      Trusted Tech

      Site Contributor
      100+ Posts
      • May 2014
      • 199
      #2
      Re: WC 7545 Unable to Connect to Remote Server

      I see your posts here on the forum, but you are in over your head with this machine.

      Call 1-800-XEROX and get someone out to initialize the unit and perform base setup.

      Sent from my SM-J120W using Tapatalk

        Comment

        • Rosenthal
          Junior Member
          • Apr 2017
          • 8
          #3
          Re: WC 7545 Unable to Connect to Remote Server

          Actually, I bought a second machine from the one I wrote about earlier. This is 7545 II. Lol But no worries. It turns out it was a firmware issue. There was a more recent firmware that I needed. All is well now.

            Comment

            • prismtech
              Trusted Tech

              Site Contributor
              100+ Posts
              • May 2014
              • 199
              #4
              Re: WC 7545 Unable to Connect to Remote Server

              Firmware never hurts. Usually.

              Sent from my SM-J120W using Tapatalk

                Comment

                Previous template Next
                Working...