Xerox4110 - working driver for Windows 10

[paul_gmb]

Hey there,


Anyone found a good driver for WIN 10 that is working with the 4110 ?

We have found 1 version, but when you start printing you have to reset the printer. I mean hit you print and it gives an error that means you have to reboot. Then you reset and sometimes it works.

[InterfaceP]

Re: Xerox4110 - working driver for Windows 10

Good luck finding one... I have found that using a driver for windows 7 or 8 will sometimes work.

[paul_gmb]

Re: Xerox4110 - working driver for Windows 10

Good luck finding one... I have found that using a driver for windows 7 or 8 will sometimes work.

We were working with the EFI controller. We found one global print driver which let us do quick jobs for A4 and A3. For more complex jobs we would just login into command workstation and work from there.

But ever since the EFI failed we are hopeless.

By the way, have you ever had issues with the EFI X4110 combo ? By issue I mean the server failing, reinstalling everything and works great untill you connect it to the printer. Than it freezes. Did 4 reinstalls, swapped RAM,HDD but still no luck.

[jelassiy]

Re: Xerox4110 - working driver for Windows 10

Hello.
For Xerox 4110 with freeflow print server, You Can find driver at this adress:
Xerox 4110 Copier/Printer with Xerox FreeFlow Print Server and DocuSP Drivers & Downloads

[InterfaceP]

Re: Xerox4110 - working driver for Windows 10

We were working with the EFI controller. We found one global print driver which let us do quick jobs for A4 and A3. For more complex jobs we would just login into command workstation and work from there.

But ever since the EFI failed we are hopeless.

By the way, have you ever had issues with the EFI X4110 combo ? By issue I mean the server failing, reinstalling everything and works great untill you connect it to the printer. Than it freezes. Did 4 reinstalls, swapped RAM,HDD but still no luck.

Yes I have. Sounds to me like the processor is over heating, the thermal paste on the underside may need to be replaced. First inspect the processor fan, then remove it and wipe away the old paste, reapply and see if that works.

We also have several external Fiery's for sale if you need a replacement.