C8130 - I believe I need special boot

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MHeon71
    replied
    I am all set, thank you. Was finally able to get in.

      Leave a comment:

    • Tom68
      replied
      Originally posted by MHeon71
      It was definitely 105, and I am thinking it was 105.009.009.34422.
      Xerox Altalink C8130/35 special boot I haveļ¼Œplease contact tl1144683044@outlook.com.

        Leave a comment:

      • MHeon71
        replied
        It was definitely 105, and I am thinking it was 105.009.009.34422.

          Leave a comment:

        • xcopytech
          replied
          Do you know what software version was on machine?

            Leave a comment:

          • MHeon71
            started a topic C8130 - I believe I need special boot

            C8130 - I believe I need special boot

            I have tried to flash firmware on this copier, and it did not work. I let it run for over 1 hour and 15 minutes but just seemed hung. I restarted and it just hangs at the blue screen. I was not able to do a Forced Altboot. I was hoping to do a Special Altboot, but cannot get into GSN. Is there another way around this issue.

            I never seem to go into GSN anymore, I do not have GSN lock and the person that use to take care of the GSN password has been out of work for roughly 6 months. I am not sure if I am locked out now. Xerox tech support has tried to share it on Sharepoint, but I have not been able to access it.

            Thanks for any help
            Tags: None
            Previous template Next
            Working...