Xerox licensing for 6204 is not available

[aneudimadera]

Re: Xerox licensing for 6204 is not available

If you have an old enablement plot files it is possible to create new file from old one.

Can you please explain that procedure? I was looking some files but I cant figure out what to change.

Enviado desde mi STK-LX3 mediante Tapatalk

[xenalit]

Re: Xerox licensing for 6204 is not available

Hello xcopytech, I wanted to know if I can make some technical questions, it is with respect to Xerox 6204 plotters and the problem of licenses on servers. I have done some tests and experiments but without good results, so I wanted to rely on your experience and see if there is any solution to the problem. Thank you very much and I look forward to your answer. Best regards.

What exactly did you try? Have you tried installing clones of disks from other controllers?

[xenalit]

Re: Xerox licensing for 6204 is not available

Hello.I have an Xerox WF 6204 freeflow Optiplex 780 controller, I need to restore the system on it, but the licenses can no longer be activated. Perhaps someone has a working image hdd of the Optiplex780 disk, thank you in advance.
Also, when installing the system again, the web interface does not work, jbossrunning does not start, what could be wrong?

Try installing a new Accxess after installation on the controller to which the printer, scanner and UI are connected.

But this makes little sense, because... no licenses. I have no experience with images from other controllers yet.

[Tecnico_Xerox]

Re: Xerox licensing for 6204 is not available

If you have an old enablement plot files it is possible to create new file from old one.

Hello xcopytech, I wanted to know if I can make some technical questions, it is with respect to Xerox 6204 plotters and the problem of licenses on servers. I have done some tests and experiments but without good results, so I wanted to rely on your experience and see if there is any solution to the problem. Thank you very much and I look forward to your answer. Best regards.

[Dmitry77]

Re: Xerox licensing for 6204 is not available

Hello.I have an Xerox WF 6204 freeflow Optiplex 780 controller, I need to restore the system on it, but the licenses can no longer be activated. Perhaps someone has a working image hdd of the Optiplex780 disk, thank you in advance.
Also, when installing the system again, the web interface does not work, jbossrunning does not start, what could be wrong?

[xenalit]

Re: Xerox licensing for 6204 is not available

If you have an old enablement plot files it is possible to create new file from old one.

Hello! I am an authorized Xerox engineer. I was surprised to find a closed license activation portal. The upward appeal was unsuccessful, the equipment was removed from support. Do you think a clone of a disk from the same machine will work on a different controller? It's a shame that good technology becomes just a piece of iron...

[xcopytech]

Re: Xerox licensing for 6204 is not available

If you have an old enablement plot files it is possible to create new file from old one.

[tcal123]

Re: Xerox licensing for 6204 is not available

Hi there! Im from Bulgaria. Our company have Xerox 6204 wide format, and from one month the device can only to print, we cant make scans, before that we can make it. Can you please help me to resolve this problem some how? best regards!

[aneudimadera]

Re: Xerox licensing for 6204 is not available

You will have something new with the process?, it works for you?.
Greetings

Hello, the cloning procedure was successful with ghost4unix, but here are many customers with problems because they have controllers with damaged HDD and need to replace them.

I really don't know why Xerox is doing this because that printer is one of the most reliable and stable machines they have. I have more than 50 customers here in DR and the printers are in perfect working conditions.

Enviado desde mi STK-LX3 mediante Tapatalk

[over]

Re: Xerox licensing for 6204 is not available

I try it right now and it works.
Try to clone hdd with ghost4unix

Hello!

Is it works (xrxgsn) with accxes HFT controllers? serial number prefix PUN. ZDC-1 product identifier at case.

I used Synergix scanner with Accxes HFT controller for scanning. After russian rocket attacks in my office controller fell down on the floor and HDD was broken.
I reinstall system at new HDD, but i cant activate scan to net cupon.

any ideas how to make it work?
thanks a lot for ideas..

[Tecnico_Xerox]

Re: Xerox licensing for 6204 is not available

Nice, I will try that. Thanks!


Enviado desde mi STK-LX3 mediante Tapatalk

You will have something new with the process?, it works for you?.
Greetings

[aneudimadera]

Re: Xerox licensing for 6204 is not available

I try it right now and it works.
Try to clone hdd with ghost4unix

Nice, I will try that. Thanks!


Enviado desde mi STK-LX3 mediante Tapatalk

[xcopytech]

Re: Xerox licensing for 6204 is not available

I try it right now and it works.
Try to clone hdd with ghost4unix

[aneudimadera]

Re: Xerox licensing for 6204 is not available

Enter prefix and controller serial number

That was exactly what we were doing

Enviado desde mi STK-LX3 mediante Tapatalk

[aneudimadera]

Re: Xerox licensing for 6204 is not available

Also I was trying to clone the HDD from a LVX server because the customer is worried about the situation and wants to save a backup, the cloning was made offline but didn't work, after the post the server freeze.

Enviado desde mi STK-LX3 mediante Tapatalk