Media Pack Contents � BP2 Integrated (part number 301N61700)

[ktxerox]

Dear All,
I need subjected kit for my BP2 integrated fiery for DC700i. i have EXi 700 disks but its not working with BP2 Integrated fiery. Hang on (waiting for fiery to be ready ). Also tried through USB but no success .

[xcopytech]

[ktxerox]

Do you have an old configuration report to see what software was on fiery

No I received this Fiery without Hard drive.

[xcopytech]

[ktxerox]

Does usb upgrade finish, fiery go off.
When power on fiery do you have any code on small led display

No error code on display. When I powered on fiery with USB it's boot up normally after 00 it's gets powered off after few seconds.
Installation Is not complete successfully.

[xcopytech]

[ktxerox]

Have you set service switches to usb boot mode

Yes 1 is on and 2 is off and installation from cd both are on position.

[adriansto]

Yes 1 is on and 2 is off and installation from cd both are on position.

Part number for system software dvd for BP2 Fiery = 45100971. Dont try to use system software dvd from old MMX Fiery.

[ktxerox]

Ktxerox@gmail.com

[ktxerox]