cute image defect, I wan't that for my brands lol
-
Re: Fireworks on printing
Check IBT belt if sticking with the drive roll or steering roll , open IBT drawer and manually drive the belt by hand and see how it behave if bump in the middle when turning or any sticky sound .
Hope this help,
Wiwa 72 Gonzos build v.1.0Leave a comment:
-
Re: Fireworks on printing
Defective IBT belt. Actually it's a common failure of aftermarket belts, I recommend using just OEM.
Enviado desde mi STK-LX3 mediante TapatalkLeave a comment:
-
Re: Fireworks on printing
First check image on belt before 2nd btr.
If you have it on belt, then check drums, first btrs and ibt belt.
If not, then 2nd btr and fuserLeave a comment:
-
Fireworks on printing
Good afternoon mates.
I have the following problem on a Xerox Docucolor 550, when printing these types of imperfections appear in the copy, they are similar to fireworks. They come out randomly in all colors (CMYK). A complete maintenance of the equipment was carried out and the IBT was changed, this was 2 days ago and today at noon the failure began.
Any of you will have an idea what it could be, this problem is the first time I've seen it and there is no information in the technical manual about it, I don't know where to start checking.
I hope for some advice based on your experience and I look forward to any response.
Greetings
Leave a comment: