Thermal fuse for 260 fuser

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • nikolai.aleksie
    replied
    Re: Thermal fuse for 260 fuser

    Originally posted by big mike
    Does anyone know the temp and amps/specs for the reset fuses used when rebuilding the fusers for the 7775 family? I used the ones with a white end. Are the 162c or 182c? I can't read the micro print, it's worn off.
    You can use a wire to connect both ends where the thermal fuse is placed, make a few copies, and then remove the wire to reset the fuser.

    Leave a comment:


  • big mike
    replied
    Re: Thermal fuse for 260 fuser

    Originally posted by xcopytech
    You can use any between 85 and 105C
    Thanks, that helps.

    Leave a comment:


  • xcopytech
    replied
    Re: Thermal fuse for 260 fuser

    You can use any between 85 and 105C

    Leave a comment:


  • big mike
    started a topic Thermal fuse for 260 fuser

    Thermal fuse for 260 fuser

    Does anyone know the temp and amps/specs for the reset fuses used when rebuilding the fusers for the 7775 family? I used the ones with a white end. Are the 162c or 182c? I can't read the micro print, it's worn off.
Working...