Xerox Copy Centre C35/ Document Feeder

[tcypy1961]

Is the paper feed limit pulley in the document feeder the main cause for multifeeding? Basically what is happening is that it starts out by feeding correctly and taking in one sheet of paper but then it takes 2 at the same time until it takes all the rest of the originals in the feeder in at the same time. Any help appreciated, thank you.

[Goshe]

try to clean up the feed rollers

[gregoryk]

only the replace of the dadf feed rolls will give you the solution

[a.ghafari]

Hi

There are 3 feed component in DADH feed unit, 2 of feed rolls with gray color work for feeding and another one in the bottom with white shild that has a one-way mechanical clutch inside stop the second original (retard roll)
So please check 2 defect in retard roll : one-way clutch operation / white shild on the surface

[xeroxsharp]

113R00651 DADF FEED KIT This is CRU

BR