WCP 3545 AltBoot Instructions

[bojans]

Hi,

I was having troubles with reloading ess software with WCP C3545. Does anyone have AltBoot Instructions in PDF. Eureka says it's GSN Library 4208, but I don't have it. It' same for DC2240, DC3535, WCP 32/40.

Thanks

[tech9]

its on the edoc GP24 i think it is roughly the the same as 1632 2240 3535 i.e load the sbc bin file then the ekp os file then load the kfs tgz file. once the cd is loaded and you have a correct working pws and you run altboot the files automatically appear when you browse. Very simple i love doing Altboots better than changing dev housing on these units.

[bojans]

Thanks tech9, Problem solved.
What you described wasn't problem. My laptop hadn't communicated with ess over the crossover cable. So I thought that there should be other IP address. But I had two faulty crossover cables!@#$.

[davant123]

Where can you get the ess cd from? The manual says to re-load the ess software but dont know how? I have a pws but no cd...I have a 3535

[opn@taatta.ru]

try change com port to COM1

Thanks tech9, Problem solved.
What you described wasn't problem. My laptop hadn't communicated with ess over the crossover cable. So I thought that there should be other IP address. But I had two faulty crossover cables!@#$.

You can check cable by Hyper Termanal

[TzALbg]

Altboot is like DC555 not like 2240! There is 3 altboot files

[bojans]

[artphil]

Com1 always works!

[bojans]

Com1 always works!

Yes, indeed. Never made any problem...