Workcentre M24 Photoconductor message.

[[Horus]

Hi,

I have a M24 and apear the message to change the black photoconductor. The machine have a good print quality.
Can i reset the photoconductor message and continuous having the same photoconductor (PCU)????.

Thank's

[bojans]

Re: Workcentre M24 Photoconductor message.

You can only change/reset chip. There is no other way to do it.

[[Horus]

Re: Workcentre M24 Photoconductor message.

Ok,

Thank's.

[jcontractor]

Re: Workcentre M24 Photoconductor message.

Do you know how many total pages printed? Just for a hint.

[azehnali]

Re: Workcentre M24 Photoconductor message.

what hint
change the chip on the drum and be done with it
stop wasting the space

[jcontractor]

Re: Workcentre M24 Photoconductor message.

Did you know, those machines perform a hard stop at 500,000 copies. Nothing related to photoconductors but once stopped, very expensive to re-start the normal operations. Really not that hard.

[jcontractor]

Re: Workcentre M24 Photoconductor message.

Those chips aren't expensives, aruonf $60.00 all four.

[bojans]

Re: Workcentre M24 Photoconductor message.

Did you know, those machines perform a hard stop at 500,000 copies. Nothing related to photoconductors but once stopped, very expensive to re-start the normal operations. Really not that hard.

???
I hear this for the first time.

[adriansto]

Re: Workcentre M24 Photoconductor message.

At 500K the ibt belt need to be replaced.

[bojans]

Re: Workcentre M24 Photoconductor message.

At 500K the ibt belt need to be replaced.

IBT belt can be teared anytime

[adriansto]

Re: Workcentre M24 Photoconductor message.

IBT belt can be teared anytime

You are right but at 500.000 copies is a notification in HFSI item.

[bojans]

Re: Workcentre M24 Photoconductor message.

You are right but at 500.000 copies is a notification in HFSI item.

yes I know that, just reset hfsi counter and you'll have machine running again. But how jcontractor descibed I thought it was some dark force stopping machine.

[adriansto]

Re: Workcentre M24 Photoconductor message.

yes I know that, just reset hfsi counter and you'll have machine running again. But how jcontractor descibed I thought it was some dark force stopping machine.

I say only it is a notification to replace ibt belt at 500K !

[jcontractor]

Re: Workcentre M24 Photoconductor message.

At 500K the ibt belt need to be replaced.

It have a chip or need to be reset in HF Consumables area in the service mode?