Re: DocuColor 12 not registering
Thats good to know. I only know what I'm told here guys... Haven't worked for this company long..
DocuColor 12 not registering
Collapse
X
-
Re: DocuColor 12 not registering
You dont need PWSLOCK. For this copier the service manual exists in pdf format.Leave a comment:
-
Re: DocuColor 12 not registering
I do have documentation and the password for the PWSLOCK, It has all the schematics and what not PRoblem is im trying to figure out if its in here or what do they call it versus what I am calling it in press terms.Leave a comment:
-
Re: DocuColor 12 not registering
These machines need full service every 1-2K.
If you're going to do it by yourself, at least you'll need service manual.Leave a comment:
-
Re: DocuColor 12 not registering
Any suggestions besides Manual Guy? Not saying he's not helpful. I don't know an awful lot about this machine and the company owner told me he wasent paying for it. Ain't that great? I'd rather pay 12 bucks for a manual versus service calls and what not!Last edited by industrifox; 09-30-2011, 01:29 PM.Leave a comment:
-
Re: DocuColor 12 not registering
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.comLeave a comment:
-
-
Re: DocuColor 12 not registering
Registration clutch slipping is the most common.Leave a comment:
-
DocuColor 12 not registering
Today I had to print a few hundred pages at 4 up, but the image would not center so I had to run it at 2 up (only way i could get a work & back to work, though it didnt align it well..).. It seems like the paper slips inside the machine, not one copy is in the same position on the paper at output. What could be going on inside?
Leave a comment: