DC430st please advise on SM ansd shared parts with other models Explained below

[axyun]

I have been unable to get the SM for the DC430st. I usually have no problem but so far no luck. I have the 220/230Dc family but the DC430 is not included in that though it appears very similar. I may need fuser unit(U4-1 error) or part for it but need to make sure I am ordering correct part number.
I checked the Dc332 family and that doesn't seem to include DC430 either. Any help is greatly appreciated. I am on my way to the DC430 call with the U4-1 code. Frank/ActionPhotocopy

[adriansto]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

I know about the 420st which is like DC230. Small fuser roll in diameter.
I dont know about 430st

[axyun]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

Thanks Adrian. The Dc430 is a tough one. It looks so much like the Dc220/230 but the fuser for those machines does not include the DC430 on its list. Frank

[Enzo]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

I have both the dc230st that the dc440st and effectively their fusers are different from one another.
Your dc430st belongs to the series dc440st. then, the fuser is good for this series of machines: DocumentCentre DC332, DC340, DC425, DC430, DC432, DC440, & N24, N32, N40, N3225, N402. I use one of those and it works fine.

[axyun]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

Thank you Enzo. Someone else just confirmed what you are telling me. The weird thing is Xerox was giving me the part # for the DC222/230 (126k06052) and I asked them if they were sure because my research did not support what they were telling me. Molto grazie and buonanotte. Francisco

[Enzo]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

absolutely not! are different from each other the 2 fusers! If you want I can send you some photos.

[axyun]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

I know the guy at xerox was making a mistake and probably looking in the DC230 parts list. I ordered the DC332 fuser 600K73193.Frank

[Enzo]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

Perfect

[adriansto]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

But you are sure the fault is inside the fuser module ?

[axyun]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

I am not sure. I thought it was most likely cause of problem. Do you think maybe LVPS? Frank

[adriansto]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

May be that because U4-1 is subtemperature

[axyun]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

I had just assumed that the U4-1 error was caused by the Fuser unit but when I installed another I still had same error. This is a good fuser tested in another customer's machine to chect if defective. The manual does not suggest a LVPS problem but points toward the MCU PWB which I don't have and assume is expensive. Please advise. Frank

[adriansto]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

First you must checking if the fuser lamps is on when you power on the machine

[axyun]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

Fuser lamps don't come on. Fuser stays cold.Frank

[adriansto]

Re: DC430st please advise on SM ansd shared parts with other models Explained below

I think you have 120 volts main power supply in US
Chek inside LVPS if you have 110 volts on fuser connector