printer motor err� 420 workcenter 420

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • javier4065
    Trusted Tech
    • Feb 2007
    • 251

    #1

    printer motor err� 420 workcenter 420

    Hello, I have this old copier, it was funcionating, I did maintenance it I clean theunit laser, and now when the copier is ready to copy, I Want to make a copy display says printer motor error.What was my mistake. thanks.perdon the model is documentcentre 420.thanks.
    Last edited by javier4065; 02-22-2013, 01:43 PM. Reason: the model is document centre 420 y no workcentre
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

    Comment

    • javier4065
      Trusted Tech
      • Feb 2007
      • 251

      #3
      Re: error 3.3 documeny Centre 420 xerox

      [QUOTE=javier4065;343420]Hello, I have this old copier, it was funcionating, I did maintenance it I clean theunit laser, and now when the copier is ready to copy, I Want to make a copy display says printer motor error.What was my mistake. thanks.perdon the model is documentcentre 420.thanks.[/QUOT display says u3.3 what can I do to solve it thanks
      Last edited by javier4065; 02-23-2013, 03:00 AM.

      Comment

      • adriansto
        Service Manager

        Site Contributor
        VIP Subscriber
        1,000+ Posts
        • Nov 2007
        • 2387

        #4
        Re: error 3.3 documeny Centre 420 xerox

        Do you have service manual for this machine ?

        Comment

        • javier4065
          Trusted Tech
          • Feb 2007
          • 251

          #5
          Re: error 3.3 documeny Centre 420 xerox

          Originally posted by adriansto
          Do you have service manual for this machine ?
          I have it but I don't remenber where is it? I Know that the problem is the laser unit ,but It was fine, What should I check to solve this error code? thanks

          Comment

          Working...