Everything about Xerox Document Centre ColorSeries 50

hello

how or were can i find ram installation instructions for a xerox document center colorseries 50 machine ?

thanks for your time

[Sbarro]

I’m very grateful.
I see it’s really hard to get any Xerox manuale or software

[xcopytech]

check your email

[Sbarro]

Okey. We have authorization only for TOSHIBA.
It's not worth to get authorization for one machine and you know that.
Thanks anyway.

[xcopytech]

For PWS software you must have xerox software and authorization.

PDF service manual you can find at www.manuals4you.com

[Sbarro]

Thank you very much for helping understanding this machine. I'm familiar only with Toshiba and a little bit of Ricoh/KonicaMinolta. Can you know who can send me service manual and maybe this software ? I can help with any stuff from Toshiba.

[xcopytech]

DCCS 50

It is same machine as Xerox dc 12, just have internal print controller at back side of machine (COBRA). Controller have UNIX as OS, 256 MB of RAM, 10 - 20 GB HDD, and it is slower when printing then any fiery which can be connected on this machine. Print quality also is not best but can be used.

Also you maybe have DCCS 50 which have some of fiery`s (X12, EX12, Xe12, XP 12).

Some of adjustments can be done through UI diagnostic, but if you want to make registration adjustment, or to upgrade system software you will need laptop with xerox PWS software.

[Sbarro]

I need mainly service manual.
It has Fiery ,but i don't know what model is this yet.

sbarro@tlen.pl