Xerox DCC III 3007 email

[Alex1]

I have a Xerox DCC III 3007. I went into service mode to delete all data from the HDD, after doing so I turned the machine back on and went to All Services and realized email wasn't there, I went into log in to assign the email feature to All Services but nothing appears any suggestions to what I need to do? Much appreciated.

[livewire]

Re: Xerox DCC III 3007 email

You should probably enter Enablement code to activate the scanning function again.
Scanning is optional and includes Scan to Email, MailBox, PC/ Server (using FTP/ SMB protocol).
Look for the code in the Scanning kit booklet.

[Alex1]

Re: Xerox DCC III 3007 email

You should probably enter Enablement code to activate the scanning function again.
Scanning is optional and includes Scan to Email, MailBox, PC/ Server (using FTP/ SMB protocol).
Look for the code in the Scanning kit booklet.

Thanks for the reply. Scan to Mailbox, PC and Network Scanning are all there it only email that's not active. I don't have the Scanning kit booklet.

[copytech200X]

Re: Xerox DCC III 3007 email

u need software key.

[livewire]

Re: Xerox DCC III 3007 email

Try this:

Fuji Xerox Driver Download

How To
Email

How To Set Up Scan to Email From the Control Panel

[Alex1]

Re: Xerox DCC III 3007 email

Try this:

Fuji Xerox Driver Download

How To
Email

How To Set Up Scan to Email From the Control Panel

I appreciate the help worked fine. Thank you.

[livewire]

Re: Xerox DCC III 3007 email

excellent!

[Texiun]

Re: Xerox DCC III 3007 email

Also remember to re-enable email under ports

[Alex1]

Re: Xerox DCC III 3007 email

Also remember to re-enable email under ports

Will do. Thank you so much.