Hi guys,
i think the above title error code is familiar with some of you.
This error code is "Yellow Dispenser failed"
First Action: service Dispenser motor; check sensor and motor status
Secondly, reset error code by enter 763-312 = [0]
after the above has been done, this error still occur after some times.
finally, found out the middle gear at this yellow DV tank has broken, which the magnetic roller turning only but both shaft inside are not turning.
Well, this gear can be replace by taking it from old dv tank , else will have to replace new tank.
hope this can help you guys.
Tarzan Y DV.jpg
i think the above title error code is familiar with some of you.
This error code is "Yellow Dispenser failed"
First Action: service Dispenser motor; check sensor and motor status
Secondly, reset error code by enter 763-312 = [0]
after the above has been done, this error still occur after some times.
finally, found out the middle gear at this yellow DV tank has broken, which the magnetic roller turning only but both shaft inside are not turning.
Well, this gear can be replace by taking it from old dv tank , else will have to replace new tank.
hope this can help you guys.
Tarzan Y DV.jpg