Hi,
If we make booklet prints, also stapled, Tray Belt Drive Motor moves only 2-3mm and wont carry away finished booklets from booklet unit and after 5-6 booklets they stuck together booklet unit and machine sees jam.
What i did also:
1) Tried another booklat tray - No results
2) Initialized finisher NWM - No Results
3) Reinstalled finisher ROM soft - No results.
Explaining video:
https://www.youtube.com/watch?v=vck3...ature=youtu.be
Any ideas?
Tnx
If we make booklet prints, also stapled, Tray Belt Drive Motor moves only 2-3mm and wont carry away finished booklets from booklet unit and after 5-6 booklets they stuck together booklet unit and machine sees jam.
What i did also:
1) Tried another booklat tray - No results
2) Initialized finisher NWM - No Results
3) Reinstalled finisher ROM soft - No results.
Explaining video:
https://www.youtube.com/watch?v=vck3...ature=youtu.be
Any ideas?
Tnx