Xerox 6060 catch tray repair kit

[Kaz73]

Re: Xerox 6060 catch tray repair kit

The 655N124 kit requires an electric drill and 3/32 drill bit to mount the new support brackets to the lower section of the catch tray. Complete instructions come with the kit.

Thanks Xtrain, much appreciated

[Kaz73]

Re: Xerox 6060 catch tray repair kit

[QUOTE=tasosGR;466802]XEROX 655N00124 655N124 Oct Repair Kit

Thanks TasosGR, much appreciated

[xtrain]

Re: Xerox 6060 catch tray repair kit

The 655N124 kit requires an electric drill and 3/32 drill bit to mount the new support brackets to the lower section of the catch tray. Complete instructions come with the kit.

[tasosGR]

Re: Xerox 6060 catch tray repair kit

Its the offset catch tray mounted to the right side of the output module.

XEROX 655N00124 655N124 Oct Repair Kit

[Kaz73]

Re: Xerox 6060 catch tray repair kit

Is this the offset catch tray mounted to the right side of the output module? Or is it the standard catch tray on the right of the stacker?

Its the offset catch tray mounted to the right side of the output module.

[xtrain]

Re: Xerox 6060 catch tray repair kit

Is this the offset catch tray mounted to the right side of the output module? Or is it the standard catch tray on the right of the stacker?

[Kaz73]

Hi does anybody know the part number of the catch tray repair kit for a 6060, the 2 white plastic lugs that slide into the machine have snapped off and left the catch tray just hanging. I know there is a repair kit but do not know the part number.

Thanks

Kaz