Hello everyone.
I have a phaser 7700 and it has a fusing problem, after a few prints (embedded pages or print jobs) the fusing drops from the entire page, color or BW, the things I have tried have been to replace the fuser itself and I have replaced the Low voltage power supply board...after talking with Xerox support i found out that the previous service vendor( service history ) had also replaced the Controller board. but - the problem remains.
please help.
thank you
I have a phaser 7700 and it has a fusing problem, after a few prints (embedded pages or print jobs) the fusing drops from the entire page, color or BW, the things I have tried have been to replace the fuser itself and I have replaced the Low voltage power supply board...after talking with Xerox support i found out that the previous service vendor( service history ) had also replaced the Controller board. but - the problem remains.
please help.
thank you