RP3105 master compression plate stuck in down position

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PurDuboisPress
    Junior Member
    • Mar 2017
    • 9

    #1

    RP3105 master compression plate stuck in down position

    Hi all,
    Has anyone ever encountered this? In test mode I ran the "compression plate home action" and "master compression cycle action". The motor runs when the action is engaged but the clamp stays down.
    With the clamp down, it isn't possible to remove the master disposal tray, which I believe is necessary in order to remove the master disposal unit. Any thoughts on what the problem may be, or advice on how to get the unit out of the machine with the disposal tray still in the unit?


    Thanks
Working...