Watching "Tech" video on Youtube FSC Drum Problem... Grease transferred to OP

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • monarke4
    Trusted Tech

    Site Contributor
    100+ Posts
    • Oct 2018
    • 178
    #1

    Watching "Tech" video on Youtube FSC Drum Problem... Grease transferred to OP

    I'm watching this video and thinking to myself, you are getting grease all over the OPC after disassembly of the transfer roller....oy.

    KYOCERA FSC DRUM PROBLEM Replacemeent & Cleaning Unit

    YouTube

    Maybe since there are one too many "E's" in Replacement, that should have been my first clue?

    Just kidding
    Tags: drum, grease, kyocera, opc, video
    • JR2ALTA
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2010
      • 2017
      #2
      Re: Watching "Tech" video on Youtube FSC Drum Problem... Grease transferred to OP

      WTF he didn't even fix it. At the end it's still not cleaning.

        Comment

        • Phil B.
          Field Supervisor

          10,000+ Posts
          • Jul 2016
          • 22808
          #3
          Re: Watching "Tech" video on Youtube FSC Drum Problem... Grease transferred to OP

          Originally posted by JR2ALTA
          WTF he didn't even fix it. At the end it's still not cleaning.
          what did you expect from a youtube video?

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22703
              #4
              Re: Watching "Tech" video on Youtube FSC Drum Problem... Grease transferred to OP

              I have to wonder when the person creating the instructional video clearly has never done the task.

              "Huh ... the right charge roller bushing doesn't seem to be coming out. Maybe I should have practiced that before starting to video?"

              "Huh ... the drum shaft doesn't seem to fit when I put it in this way."

              "Huh ... no matter how much I wipe the drum and blade it still doesn't seem to clean. What was the point of this video? Clearly I didn't fix anything.

              =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 35065
                  #5
                  Re: Watching "Tech" video on Youtube FSC Drum Problem... Grease transferred to OP

                  I was taught to roll a couple of sheets of paper between the charge roller and the charge cleaning brush roller. Prevents toner from being transferred from the brush roller to the still damp charge roller.

                    Comment

                    Previous template Next
                    Working...