BROTHER MFC-9140CDW - OverHeating problem

[dadjo]

[Phil B.]

Re: BROTHER MFC-9140CDW - OverHeating problem

how are the fan grids?

filled up with fuzz?

check the thermistors .. make sure they are set right.

are these Genuine OEM fusers you are installing? or some cheap 3rd party rebuilds?

Genuine OEM toners?

what are the page counts on the unit?

[dadjo]

Re: BROTHER MFC-9140CDW - OverHeating problem

how are the fan grids? - all clean

filled up with fuzz?

check the thermistors .. make sure they are set right. - I think it has only two termistors inside fuser - all ok.

are these Genuine OEM fusers you are installing? or some cheap 3rd party rebuilds? - genuine OEM Fuser

Genuine OEM toners? -

what are the page counts on the unit? - 17000 pag . brand new

Hello

just answered above.

thank you for help

[dadjo]

[Phil B.]

Re: BROTHER MFC-9140CDW - OverHeating problem

Hello

just answered above.

thank you for help

3rd party parts are SHIT


OEM Genuine ONLY.

see what taking the cheep route has gotten you?

[Phil B.]

Re: BROTHER MFC-9140CDW - OverHeating problem

the sensors are in the drum frame .. toners don't have them

QUIT USING THE 3rd party shit.. it destroys fuser.belt... cheep always causes more headaches.

[dadjo]

[dadjo]

Re: BROTHER MFC-9140CDW - OverHeating problem

hello people. Soooo... the problem was... a fan upside down.. We got a printer from another client and we compared it, saw the fan the other way around.

Some many problems and no one noticed the fan was doing intake instead of extract... bummer...

well, all ok now. thank you for all help...

[Gift]

Re: BROTHER MFC-9140CDW - OverHeating problem

Thanks for updating the thread - was this factory screwed up or might've been happened during the fuser replacement?

[tsbservice]

Re: BROTHER MFC-9140CDW - OverHeating problem

Thanks for updating the thread - was this factory screwed up or might've been happened during the fuser replacement?

? Fuser replacement !

[dadjo]

Re: BROTHER MFC-9140CDW - OverHeating problem

hello. This problem was already when we received the printer. Possibly was when at another repair shop they repaired the printer and assembly it wrong.