[Jamming] Brother MFC-L8690 CDW paper sticky on rear double rolls

[ITMusic]

Hi All

I have a Brother printer MFC-L8690CDW which have paper sticky on the rear as shown in the picture.
Does anyone know how to remove the rolls without disassembling the printer?

Thanks in advance

Brgds. Michael

[Gift]

not possible, try and use a sharp blade and cut the paper in horizontal direction (carefully to avoid damaging the roller).

[ITMusic]

Sorry for my late response.
But thank you for your info.
Brgds
Michael

[dalewb74]

i recommend you have a brother technician replace the fuser.

[ITMusic]

Hi dalewb74
Thanks for you comments. I do understand that I will need tpo have a Brother technician to repair.

Brgds michael

[copytechtrouble]

Hi All

I have a Brother printer MFC-L8690CDW which have paper sticky on the rear as shown in the picture.
Does anyone know how to remove the rolls without disassembling the printer?

Thanks in advance

Brgds. Michael

you don't need a new fuser.
you can remove the front roller by removing the white plastic C clip on the right hand side.
with the C clip removed the roller will move to the left and come free.
it might give you the room to remove the sticker. use some IPA to dissolve the sticky glue and you should be fine.