Brother MFC-8220 fuser coupler gear

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22997

    #1

    [Misc] Brother MFC-8220 fuser coupler gear

    Growling, growling.

    The two-stage fuser coupler gear 22/40something is looking pretty bad. Sure, I can get the left side frame assembly (LF2561001). Is there a separate part number for just the gear?

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22997

    #2
    Found it. Never mind...

    http://www.copytechnet.com/forums/br...ugh-sound.html
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    Working...