HI GUYS!
long time no see! i have this problem with a clc5000, the code is E 0194 0402. it' related to the image correction unit. things done so far replaced the image correction unit from a working machine, clean and check sensors ps39 and ps40, check the motor that drive the shutter. check in service mode if the two sensors change state. check the dc power supply and the power supply pu2, clean and brush contacts of separation hvt.
any other ideas?
thanks
Denis
long time no see! i have this problem with a clc5000, the code is E 0194 0402. it' related to the image correction unit. things done so far replaced the image correction unit from a working machine, clean and check sensors ps39 and ps40, check the motor that drive the shutter. check in service mode if the two sensors change state. check the dc power supply and the power supply pu2, clean and brush contacts of separation hvt.
any other ideas?
thanks
Denis