clc 5151 info

[Iman]

Hi all just wondering if anybody has had much experiance on the canon clc 5151 and the IR 7086.I havent worked too much on the canon in the last few years instead i have mostly been working on Ricoh and Kyocera machines.It would be good to get some info regarding the machines reliablitity and also what they are like to working on as in change units and parts.Thanks

[Paul 75]

5151's and 4080's are the dogs. Reliable enough, drums are like 3200's and normally get 40k out of them. Fusers have been a problem due to the twin belt system, but canon have updated the assy so it comes as one instead of having to remove loads to replace the belts, update firmware to v.3 to get rid of cliches. 7086 and 7105 are good work horses, must have the volume going thru, keep filters clean,replace wires at 350k and tyres at 250k and they should run sweet.

[Iman]

Thanks paul good to know.