Canon Ir400i /1730 fuser film not rotating

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dk oneal
    Technician
    • Jul 2013
    • 12
    #1

    Canon Ir400i /1730 fuser film not rotating

    My canon ir 400i has poor fixing after replacement of fuser film. I suspect the grease I applied on the element is not compatible with (metal fuser films).the grease burns out and does not allow the fuser film to rotate

    Anybody knows which ( grease is best for metal fuser films) your suggestions are welcome .thank you all

    Sent from my GT-I9500 using Tapatalk
    Tags: None
    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22808
      #2
      Re: Canon Ir400i /1730 fuser film not rotating

      Originally posted by dk oneal
      My canon ir 400i has poor fixing after replacement of fuser film. I suspect the grease I applied on the element is not compatible with (metal fuser films).the grease burns out and does not allow the fuser film to rotate
      Anybody knows which ( grease is best for metal fuser films) your suggestions are welcome .thank you all
      Sent from my GT-I9500 using Tapatalk
      if you bought JUST the film.. it SHOULD have come with a lil packet of white grease. use all of it ..spreading over the metal n head. did you replace the rubber 'gear' on pressure roller? new bushings? what about the drive gears?

        Comment

        • blackcat4866
          Master Of The Obvious

          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22702
          #3
          Re: Canon Ir400i /1730 fuser film not rotating

          I have always thought the amount of lubricant in the packet was stingy. I use Uniflor 8172 high temp grease for sleeves. =^..^=
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • Phil B.
              Field Supervisor

              10,000+ Posts
              • Jul 2016
              • 22808
              #4
              Re: Canon Ir400i /1730 fuser film not rotating

              Originally posted by blackcat4866
              I have always thought the amount of lubricant in the packet was stingy. I use Uniflor 8172 high temp grease for sleeves. =^..^=
              agreed BC... I caught some of my 'rebuild' guys trying to 'save money' and we ended up replacing them far too soon.

              never tried UniFlor before

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22702
                  #5
                  Re: Canon Ir400i /1730 fuser film not rotating

                  It's what comes with Precision Roller replacement sleeves. It's kind of expensive ... I think it was $65 for a syringe... here you go:

                  Results for UNIFLOR
                  =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • Phil B.
                      Field Supervisor

                      10,000+ Posts
                      • Jul 2016
                      • 22808
                      #6
                      Re: Canon Ir400i /1730 fuser film not rotating

                      Originally posted by blackcat4866
                      It's what comes with Precision Roller replacement sleeves. It's kind of expensive ... I think it was $65 for a syringe... here you go:

                      Results for UNIFLOR
                      =^..^=
                      thanks Brother!

                        Comment

                        • dk oneal
                          Technician
                          • Jul 2013
                          • 12
                          #7
                          Re: Canon Ir400i /1730 fuser film not rotating

                          Thanks bro ..the rubber 'gear and the bushings are ok .I think grease in the pack that comes with the sleeve is not enough .I think I need to try uniflor grease Blackcat talked about . Am a tech from west africa (ghana ) I need buy one .thanks so for your help

                          Sent from my GT-I9500 using Tapatalk

                            Comment

                            Previous template Next
                            Working...