Hi! I have a problem with my iR3300i. When I turn the power switch on, its display E732. I try to clear the error code but I can't sovle this problem.
Please help me.
Thanks for your help.
Please help me.
Thanks for your help.
-
-
732 is a communication error. I believe between the main controller and the reader controller. make sure the cable between the two is installed properly. I would reseat all connectors on both boards but you may be looking at a bad pcb at either end or possibly a bad dimm chip(which I would also reseat.)Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it. -
Either the reader cable has a bad connection or the pcb itself has failed....but USUALLY the cable is unplugged.Comment
Comment