ir3045 E110

[ps/pcl]

intermittent e110-002 and e100-0001 ERROR appears
replaced laser unit,dc controller main controller
and also some paper jams with jam code 0b00.
some times it runs upto 1000 copies well

[victor_v]

Hi, ps/pcl
E110 The scanner motor is faulty.

0001 The scanner motor speed lock signal does not indicate a
locked state a specific period of time after the scanner motor
has been started.

Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.

0002 The speed lock signal indicates a deviation 10 times in
sequence at intervals of 10 msec after the signal has
indicated a locked state.

Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.

0003 With the image clock switched over, the scanner motor speed
lock signal does not indicate a locked state 6.5 sec after a
switchover is made from low to normal speed or 8 sec after a
switchover is made from normal to low speed.

Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.

That's all from service manual.
It is useful to check up a power unit: the chain of 24 volts feeding the laser block.
Good luck.

[froozen]

check wiring from ADF to Main Body...