canon printer board ir400

[Guest]

Hello, Please guide me how to reload printer hdd of the software and run the printer. Thank you in advance

[Guest]

Hello, Please guide me how to reload printer hdd of the software and run the printer. Thank you in advance

Use PDL downloader with a parallel cable. Of course you need the software for the pinter board.

[rrj]

which is the software for printerboard

[goofball]

It should look like the attacment I included.

[Guest]

Thats the correct firmware that goofball added. Here is more info so that you don't run into any trouble. There are two types of software H1,K1,P1,and R1.
You should identify the Network Multi-pdl board H1 and the Network Printer board K1 by the Serial number.
On each printer board assembly there is a small white rectangular sticker on the metal. This sticker has a bar code and a variety of information. The information included is the EFI part number, Serial Number, Date of Manufacture, and Description. The Description will be something like 'Ship Group, PS/PCL, US English, Erebus'. It may, however, be truncated. There should be enough information there for identification. Here are the specifics for each of the 4 printer boards:
You can identify the Network Multi-PDL Printer Board-H1 (PS/PCL) and the Network Printer Board-K1 (PCL only) by the serial number.


The Network Multi-pdl board H1 serial number starts with a "K".
The Network Printer board K1 serial number starts with a "J".

[rrj]

Mr. Goofball or Mr. Screwtape

please tell me to install in the software to the printer board and the procedure and also i identified the information in the printer board and it is K1 serial number and u have to tell the rest.

Mr. Goofball can u give me a copy of the CD in the pdf file or atleast the link.

thanks