my machine is ir6000,and print out with background. after i turn off potential control the print is ok and no more bacground. how to adjust the potential setting?
-
-
You don't give us much information here, copy count would help. But I would say start with a good PM. When you say print is it doing it in copy mode too?Is the glass half full or half empty? I say neither. The glass is obviously full, full of potential. The potential to hold more water or the potential to quench a thirst. Life is all about how you see it. -
hi this machine need to change corona wires frequently. in order to maintain a good copy quality.
there is no glory without sacrifice
Comment
-
Either replace potential unit or if you use gold wire instead of slightly oxidized tungsten you will get background.
Comment
-
Ditto on restringing the wires (with the correct type of wire). They only seem to go about 50k before having quality issues. I usually replace the whole corona assm's somewhere between 500k and 1 mil.Comment
Comment