copy is smaller than the original (iRC3220)

[Guest]

copy from my machine is somewhat
reduced / smaller than the original.

the difference is small, but quite noticable
when copying graphs or tables.

anybody come about this problem?
thanks!

[nivssluck]

Check RATIO

[kittybo]

is it just using feeder or when copy off the glass??

[Guest]

Why don't you try initializing copy settings.
Or is this happening when you print?

[sgcopiertech]

@nivs, by ratio do u mean the xy in adjustment and cleaning? both r on 0

@kittybo & screw: copying both on feeder n glass both gives smaller copy, i have also tried initializing the copy settings.

thanks for your reply and hope to hear more. updates this coming week.

[Tricky]

If a original has straight lines on the extremes of the paper edge this feeder can make the lines appear a little 'wavey' due to the fact that its a belt holding the original, I havent found a way round this.

Has the dc con been cleared without the codes put back in?

[Canuck]

Reduced in what axis...scanning(laser) or sub-scanning(scanner lamp) or both? Does it do it on prints also?