Start Up Sequence of IR105.

[Pilotpor]

I've read the start up sequence from service manual.
but I'm not sure that I've understand it correctly?
So... Everyone ,Could you describe the Start up sequence for me?Please.
Since Turn on the main power switch till it ready to copy or print.

If the Boot Rom and Harddisk in IR105 can not work normally,
What's happen with the machine?

Last question... FY9-4101-002 is the part number of Service Support Tool that use with IR105,Right?

Thanks.

[bnmand]

If the Boot Rom and Harddisk in IR105 can not work normally,
What's happen with the machine?

Thanks.

Highly unlikely that both aren't working. You need to describe what's going on. e.g. Does the machine make the normal start up noise?

[Pilotpor]

I'm sorry...I used the wrong word.
I mean , If Boot Rom or Harddisk can not work normally.
One of them,not both.

[davidj7]

boot rom dosent work: the booting process wont be complete , you will get the "wait"
Hard Disk: E602 or similar code for the Hard Disk error

[nivssluck]

If bootrom has a problem the panel will not work. If the machine will not boot up and it's only "Wait" maybe HDD and the E732 cable...

[mrfixit51]

Some clarification...

Last question... FY9-4101-002 is the part number of Service Support Tool that use with IR105, Right?

The Service Support Tool does not have a part number associated with it. The number you are referring to is most likely the System Software disk. I don't know what level that disk represents, but the latest is FY9-4211-010. I am just trying to clear up some confusion here. Service Support Tool is merely the tool that allows you to load the System Software onto the hard drive of the copier.

Schools out,, you kids can go home now...