Canon IRC 624

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xcopytech
    Service Manager

    1,000+ Posts
    • Aug 2006
    • 1736

    Canon IRC 624

    Hi,

    I have message on Canon IRC 624 "replace fuser unit". Unit have been replaced but still have same message. How to clear message.

    Thanks.

    xcopytech@gmail.com
  • Copier_Guy
    Senior Tech

    500+ Posts
    • May 2007
    • 543

    #2
    iRC 624

    Originally posted by xcopytech
    Hi,

    I have message on Canon IRC 624 "replace fuser unit". Unit have been replaced but still have same message. How to clear message.

    Thanks.

    xcopytech@gmail.com
    I'm not familiar with that model. Is that a color ImageRunner? What model year is it?

    Comment

    • xcopytech
      Service Manager

      1,000+ Posts
      • Aug 2006
      • 1736

      #3
      IRC 624

      Basicly that is same machine as Canon CP 660 with some modification.

      I have service manual for CP 660 but there is nothing about "replace fuser unit"


      thanks.

      regards.

      Comment

      • ladybird
        Technician
        • Aug 2007
        • 29

        #4
        Does this machine have a reader or not?This may be a daft question but have you replaced the fixer unit?

        Comment

        • Mr Spock
          Vulcan Inventor of Death

          1,000+ Posts
          • Aug 2006
          • 2064

          #5
          Cannot find this product but I found another bulletin that tells you to do this. Hope this helps.

          Enter service mode COPIER>OPTION>BODY(level 2)>FX-MSG-SW and set to "0".
          And Star Trek was just a tv show...yeah right!

          Comment

          • jonbonse
            Senior Tech

            Site Contributor
            500+ Posts
            • Jun 2009
            • 698

            #6
            Originally posted by Mr Spock
            Cannot find this product but I found another bulletin that tells you to do this. Hope this helps.

            Enter service mode COPIER>OPTION>BODY(level 2)>FX-MSG-SW and set to "0".
            Hi

            Is it the same to get into service mode as current models (* 2,8, *)??

            Comment

            Working...