iR6570 DADF Trouble

[bakaoni666]

Hi,.. Does anyone know how to set dadf in iR6570.
when i used any size paper the adf sensor become A3. everythings looks normal..

[mrfixit51]

Place letter size paper in the entry tray, go into service mode, FEEDER>FUNCTION>TRY-LTR, and press O.K.

Then place paper guides in LTR-R position in feeder, go into service mode, FEEDER>FUNCTION>TRY-LTRR, and press O.K.

The items are now set...

[SCREWTAPE]

You can also check and make sure that your original detection sensors are set up in service mode.

Level 2/ Copier/ Option/ Body SENS-CNF = 1

SENS-CNF =0 (default) : AB Type Document Sensor Placement
SENS-CNF = 1 : Inch Type Document Sensor Placement

[teckat]

good ol' level two, all the goodies, and then some >)

[bakaoni666]

thanks...now i can a4 size but when i placed FLSC size it read as A3 ...

Another trouble... help me

[teckat]

thanks...now i can a4 size but when i placed FLSC size it read as A3 ...

Another trouble... help me

those DF settings for FLSC need to be adjusted in LEVEL 2 under Copier/ Option/ Body

in the service mode - COPIER>OPTION>BODY> CONFIG setting
you will see
XX= COUNTRY
YY= LANGUAGE
ZZ= MANUFACTURE
AA=PAPER SIZE SYSTEM/ scroll through n' switch this setting for your default paper size

look for COPIER>OPTION>BODY>SCANSLCT- in some iR's it is Level 2
set it to 1 (Scan area is determined by paper size) if it set to 0=(Scan area is determined by document detection)

while in there u will see >These are DF Settings to be changed

ORG-LGL (Used to set special paper size not compatible with DF size recognition.)
0: LEGAL (value at time of factory shipment/value after RAM clear)
1: G-LEGAL
2: FOOLSCAP
3: A-FOOLSCAP
4: FORIO
5: OFFICIO
6: E-OFFICIO
7: A-OFFICIO
8: M-OFFICIO
9: B-OFFICIO

• ORG-LTR (Used to set special paper size not compatible with DF size recognition.)
0: LTR (value at time of factory shipment/value after RAM clear)
1: G-LTR
2: A-LTR
3: EXECUTIVE

• ORG-LTRR (Used to set special paper size not compatible with DF size recognition.)
0: LTR-R (value at time of factory shipment/value after RAM clear)
1: G-LTR-R
2: A-LTR-R
3: EXECUTIVE-R

Level 2 under COPIER>OPTION>BODY><INT-FACE>
<CST>
• U1-NAME (Used to turn paper name display when U1 paper size group is detected ON/
OFF.)
0: Display “U1” on touch panel (default).
1: Display paper name set by “CST-U1” service mode item.
• U2-NAME (Used to turn paper name display when U2 paper size group is detected ON/
OFF.)
0: Display “U2” on touch panel (default).
1: Display paper name set by “CST-U2” service mode item.
• CST-U1 (Used to specify paper name used by U1 paper size group.)
• CST-U2 (Used to specify paper name used by U2 paper size group.)
24: FOOLSCAP (CST-U2: Default)
25: Australian FOOLSCAP
26: OFFICIO
27: Ecuador OFFICIO
28: Bolivia OFFICIO
29: Argentine LETTER
30: Argentine LETTER-R
31: Government LETTER
32: Government LETTER-R
34: Government LEGAL
35: FOLIO
36: Argentine OFFICIO
37: Mexico OFFICIO
38: EXECTIVE (CST-U2: Default)