Canon ic C2100 error code 667

[stevee104]

Have a machine that was giving to us and has a code e667 and a e240 code.Do not have a manual
for it and don't want one just trying to see if it worth keeping or trashing it.

[teckat]

Have a machine that was giving to us and has a code e667 and a e240 code.Do not have a manual
for it and don't want one just trying to see if it worth keeping or trashing it.

E240> CAUSE

• The communication between the DC
controller PCB and the reader controller
PCB is faulty.
• The communication between the DC
controller PCB and the PS/PCL
board or between the reader controller
PCB and the PS/PCL board is
faulty.

ISSUE:

The DPPRDY signal is not sent for
0.25 sec or more from the reader
controller to the DC controller PCB
after the DC controller PCB is supplied
with power.


• The signals between the PS/PCL
board and the DC controller PCB or
between the PS/PCL board and the
reader controller PCB cannot be
exchanged for a specific time after
the PS/PCL board is supplied with
power.

i think other code E667 is for AC Controller