ir2270 E-000110-0001.

[ymmtech]

This is a good machine with firmware not so up to date. So I updated its firmware.
The process was smooth, at the last boot up, machine show ready status for about 20 seconds, and pop up message E-000110-0001. The same message appeared after every power on.
Can some one tell me what is wrong? What to do next ?
I am using SST 3.22.

[mrfixit51]

Explain to me how you can use a parallel cable on a copier that does not have a parallel port on it??? Do you have the model of the copier correct? The 3300 series was the last in that line to have a parallel port on it...

[jacky]

For my understanding on this model, it should using cross cable and no more parallel cable shot as bro mrfixit51 said. R u using the converter from parallel to network? pls provide more details, more easy to let us understand your current issue......

[ymmtech]

Just edited my post.

[teckat]

This is a good machine with firmware not so up to date. So I updated its firmware.
The process was smooth, at the last boot up, machine show ready status for about 20 seconds, and pop up message E-000110-0001. The same message appeared after every power on.
Can some one tell me what is wrong? What to do next ?
I am using SST 3.22.

how old was previous BOOTROM ?? / and or firmware ver. ???
if u jumped all the way to v40.03 with out checking it first / could cause issues

If an imageRUNNER 2270/ 2870/ 3570/ 4570 being upgraded has a BootROM version of v3.30 or less, the
BootROM should be upgraded first. The copier should then be rebooted and the remainder of the items upgraded.
The ALL file automatically does the BootROM first, followed by a message to reboot.

[ymmtech]

Thanks teckat,
I upgraded boot ROM 0636 to 1143, steps as in ALL_USenv4003. The machine reboot 3 times.
....And finally got the E000110-0001 message.
I think I am using correct method because it work on other units of same model.

[montana]

hi....this error code is related to the scanner motor faulty..check the laser unit or DC controller..you should also check the wiring

[SCREWTAPE]

E110-0001-Replace your laser scanner unit, its faulty.

[ymmtech]

Thanks screwtape and montana, I am going check it out tomorrow.

[Bolla]

ir2270 copier can only update to 28pcs/minutes, if update more,it is will pop to error code.
and you can only need to update bootrom version from 06.36 to 06.36N.then it is ok.

[SCREWTAPE]

ir2270 copier can only update to 28pcs/minutes, if update more,it is will pop to error code.
and you can only need to update bootrom version from 06.36 to 06.36N.then it is ok.

What??

What error will pop up E110??

Enlighten me more please.

[ymmtech]

Bolla pls chk PM.

[teckat]

ir2270 copier can only update to 28pcs/minutes, if update more,it is will pop to error code.
and you can only need to update bootrom version from 06.36 to 06.36N.then it is ok.

poster is not talking about CPM/
they installed correct ver.11.43 BOOT ROM and correct Firmware v40.03

***that has nothing to do with E110-0001/
SCREWTAPE is on the money

[ymmtech]

Thanks Ladies and Gen.
Just find out DC not flash properly, but why the other 4 units OK?
Put in DC Dimm from other machine, works fine.
Now I am short of 1 DC Dimm, see how.

[teckat]

Thanks Ladies and Gen.
Just find out DC not flash properly, but why the other 4 units OK?
Put in DC Dimm from other machine, works fine.
Now I am short of 1 DC Dimm, see how.

FEB.22, 2010
The RAM or memory configuration on the imageRUNNER 2270 / 2870 / 3570 / 4570 models.
For manufacturing convenience, the DIMM configuration has been changed from using 2 x 256 MB memory DIMMs (WA7-3296-000) to 1 x 512 MB memory DIMM (WA7-4625-000)
Important Notes for Servicing the imageRUNNER 2270 / 2870 / 3570 / 4570 Models:

- When replacing a DIMM, use (Qty 1) 512 MB DIMM or (Qty 2) 256 MB DIMM. The 256MB DIMM will continue to be supplied.
- Be careful not to install a 512 MB DIMM into a machine with 512 MB already installed. Adding a 128MB, 256MB, or 512MB DIMM into the additional open slot will render the machine inoperative.
The 512MB DIMM can be mounted on either of the slots.

PRODUCTS AFFECTED / SERIAL NUMBERS AFFECTED:

imageRUNNER 2270 SLH00001 ~ SLH30543
imageRUNNER 2870 SLG00001 ~ SLG13735
imageRUNNER 3570 SKV00001 ~ SKV62419
imageRUNNER 4570 SKU00001 ~ SKU24853
DIM..JPG
[B]P-1 256MB DIMM
P-2 512MB DIMM
[A] Front face
Reverse face