need help on a canon dr7080c scanner

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • canonclc
    Technician
    50+ Posts
    • Apr 2010
    • 71
    #1

    need help on a canon dr7080c scanner

    i know its not a copier but i was asked to install a stamp into the doc feeder which included the solanoide ,loom and stamp,easy i thought but the option to stamp is still greyed out on the scanner driver .does any one know how to get into the service mode so i can switch it on
    thanks
    Tags: amp, canon, copier, customer, disk, doc, doc feeder, dr7080c, driver, feeder, greyed out, help, included, install, mode, one, option, password, sca, scan, scanner, service, service mode, stall, stalling, stamp, switch
    • CanoNiR
      Technician
      50+ Posts
      • Apr 2009
      • 50
      #2
      Enter the service mode and enable "Feeder>OPTION>STAMP-SW"
      The service mode of the DR-7080C can be executed by installing the service mode software on the computer for service.
      The service mode software is located in the setup disk provided with the DR-7080C.
      Experience is the best adviser!

        Comment

        • teckat
          Field Supervisor
          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16092
          #3
          Originally posted by canonclc
          i know its not a copier but i was asked to install a stamp into the doc feeder which included the solanoide ,loom and stamp,easy i thought but the option to stamp is still greyed out on the scanner driver .does any one know how to get into the service mode so i can switch it on
          thanks
          dr7080c>service mode password>qp
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

            Comment

            • canonclc
              Technician
              50+ Posts
              • Apr 2010
              • 71
              #4
              cheers chaps, grabbed the disk today from the customer and im just installing it.
              thanks again

                Comment

                • teckat
                  Field Supervisor
                  Site Contributor
                  10,000+ Posts
                  • Jan 2010
                  • 16092
                  #5
                  greeeeeeeeeeat'
                  **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                    Comment

                    • Iommanxman
                      Trusted Tech
                      • Aug 2009
                      • 180
                      #6
                      There is also something called QumaTool.exe for the Canon Scanners which is very useful. Bit like a service utility. Lets you turn on and off sensors and things for the Canon Scanners that don't have a display. The password for this is "market".

                        Comment

                        • teckat
                          Field Supervisor
                          Site Contributor
                          10,000+ Posts
                          • Jan 2010
                          • 16092
                          #7
                          300_password0..jpg

                          DUH'
                          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                            Comment

                            Previous template Next
                            Working...